Specifications
Service Manual 3-1
The specifiations in this manual are correct at the time of printing. Product specifications are subject to change
without notice.
3.1 General Specifications
3
Specifications
Item Description
Print Method Non-impact electro-photography
Developing system Non-magnetic, Mono-component, Non-contact method
Exposure System Semiconductor laser diode beam scanning
Fuser (toner fixing) Thermal rollers fusing with pressure (heat lamp: 800 watts)
Resolution True: 600 x 600 dpi
Addressable: 1200 x 1200 dpi
Warm-up time 110 and 220 volt units: 120 seconds (2 minutes from power on to ready)
FPOT Mono: Less than 15 seconds (Ready to 1st page out)
Color: Less than 24 seconds (Ready to 1st page out)
Feed Method MPT (Multi-Purpose Tray), Tray 1 (FCT-First CassetteTray),
Tray 2 (SCT-Second Cassette (Tray)
Dimensions Width: 510 mm (20.07 in)
Depth: 470 mm (18.5 in)
Height: 405 mm (15.94 in)
Weight Printer: 35 kg (77.2 lb) with consumables
Optional Tray 2: 3 kg (6.6 lb) with packaging
Acoustic Noise Standby: less than 41 dB
Printing: less than 48 dB (color)
Power Saver Mode Available, user settings enabled