Xerox Phaser 6100 Service Manual

Summary of Product
Service Manual 4-3
1) Imaging Unit
The imaging unit creates the image using an electro-photo process. The imaging unit consists of the following:
■ An OPC Drum
■ Waste Toner Assembly
■ Charge Roller Assembly
2) Transfer Belt (ITB)
ITB stands for Image Transfer Belt. The image developed on the drum is transferred first to the transfer belt. This
is called the T1 transfer (Primary Image Transfer).
■ The printer uses a four pass process to place the image on the transfer belt.
■ The image is created on the drum and transferred to the transfer belt in the following order: first yellow (Y),
then magenta, then cyan, and finally black.
3) Transfer Roller
Once the transfer of the image from the drum to the belt is complete, the full image is transferred from the belt to
the transfer roller. The transfer roller then transfers the image to paper. This is called the T2 transfer (Secondary
Image Transfer).
4) Tray 1 or FCT (First Cassette Tray)
Tray 1 stores and feeds paper to the printer. A pick roller picks paper, controls drive, feeds paper, and removes
static electricity from the paper.
Tray 1 Specifications:
■ Paper Feed: side registration
■ Paper Direction: Long edge
■ Paper Discharge: Separation Claw
■ Capacity: 250 Sheets
■ Paper Size: A4, Letter
■ Paper Weight (average): 60~90gsm (16~24lbs)
■ Paper Type: *see the approved Xerox media specifications in Section 3.
5) Tray 2 SCT (Second Cassette Tray) (contained in the Optional 500-Sheet Feeder)
Same as Tray 1, but holds up to 500(20 lb) sheets of paper.
6) MPT (Multi Purpose Tray)
The Multi-Purpose Tray supports custom size media and manual feed.
MPT Specifications:
■ Capacity: Cut Sheet: 100 Sheets (75 gsm / 20lb)
■ OHP: 30 Sheets, Envelopes, Labels, and Card Stock: 10 Sheets
■ Paper Arrangement: Side Registration
■ Drive: Main Motor (Brushless DC (BLDC))
■ Driving Management: Solenoid
■ Paper Discharge: Friction Pad Method
■ Paper Size: Legal, Folio, A4, Letter, Executive, JIS B5, A5, A6, Statement, Monarch (7 3/4), #9, C5, B5
Envelope, DL
■ Paper Weight and Type: See the approved Xerox media specifications in Section 3.
■ Paper Empty Sensor

Xerox Phaser 6100 Specifications

General

Color	Yes
Print technology	Laser
Maximum resolution	1200 x 600 DPI
Time to first page (black, normal)	15 s
Time to first page (color, normal)	24 s
Print speed (black, normal quality, A4/US Letter)	21 ppm
Print speed (color, normal quality, A4/US Letter)	5 ppm
Internal memory	64 MB
Standard input trays	2
Compatible operating systems	MAC OS, NT4, OS X, Win2000, Win95/98, WinME, WinXP, Win 98se
Recommended operating temperature range (T-T)	15 - 32.5 °C
Media types supported	A-4
Page description languages	GDI
Total input capacity	350 sheets

Weight and Dimensions

Dimensions (WxDxH)	510 x 470 x 405 mm