System Setup
9 - 178
9.15.3.2 Instruction allocation
1. Set this function in the KEY ALLOCATION (EACH) window. Move the cursor to the
“FUNCTION” of the key to be allocated and press [SELECT].
– Selection list appears.
2. Select “INSTRUCTION”.
– The instruction is shown in the “ALLOCATION CONTENT”
1) To change the instruction, move the cursor to the instruction and press [SELECT]. Then
the instruction group list appears.
2) Select the group which contains the instruction to modify.
3) When the instruction list dialog box is shown, select the instruction to be changed.
To Next Page
Loading...
