System Setup
9 - 179
9.15.3.3 JOB call allocation
Set this function in the KEY ALLOCATION (EACH) window.
1. Move the cursor to the “FUNCTION” of the key to be allocated and press [SELECT].
– A selection list appears.
2. Select “JOB CALL”.
– The reserved job registration no. is shown in the “ALLOCATION CONTENT” (reserved
job registration no.: 1 to 10).
1) To change the reserved job registration no. move the cursor to the no. and press
[SELECT]. Then input buffer line appears.
2) Input the number to be changed, and press [ENTER].
9.15.3.4 Display allocation
Set this function in the KEY ALLOCATION (EACH) window.
1. Move the cursor to the “FUNCTION” of the key to be allocated and press [SELECT].
– Selection list appears.
2. Select [DISPLAY].
3. Move the cursor to “ALLOCATION CONTENT” and press [SELECT].
– Character input is available.
4. Input the name of the reserved window and press [ENTER].
– The reserved name input to the “ALLOCATION CONTENT” is shown.
5. Open the window for allocation.
To Next Page
Loading...
