RS6000 Configuration and Update
104
firmware remains inside the RS6000 memory even when powering the RS6000 off/on (removing and re-installing
the battery).
Update the RS6000 firmware can be updated by:
• Direct USB using 123Scan
2
• Bluetooth connected WT6000.
Direct USB using 123Scan
2
The 123Scan
2
application can upgrade the RS6000 firmware using a USB cable to connect to a host computer.
For more information on using 123Scan
2
see 123Scan and Software Tools.
Bluetooth connected WT6000
The Zebra WT6000 wearable computer provides Enterprise Mobility Developer Kit (EMDK) support for updating
the firmware of a Bluetooth connected RS6000. Using a Mobile Device Management (MDM) application, RS6000
firmware is deployed to the WT6000 device. Then an EMDK application must be created which downloads the
firmware to the RS6000.
To Next Page
Loading...