Zebra RS6000 User Manual

Symbologies
141
Symbology Parameter Defaults
Table 10 lists the defaults for all symbology parameters. To change the default values, scan the appropriate bar
codes in this guide. These new values replace the standard default values in memory. To recall the default
parameter values, see Default Parameters on page 115.
NOTE: See Standard Default Parameters for all user preferences, hosts, and miscellaneous default parameters.
Table 10 Symbology Parameter Defaults
Parameter
Parameter
Number
SSI Number Default
Page
Number
Enable/Disable All Code Types
147
1D Symbologies
UPC/EAN
UPC-A 1 01h Enable 148
UPC-E 2 02h Enable 148
UPC-E1 12 0Ch Disable 149
EAN-8/JAN 8 4 04h Enable 149
EAN-13/JAN 13 3 03h Enable 150
Bookland EAN 83 53h Disable 150
Decode UPC/EAN/JAN Supplementals
(2 and 5 digits)
16 10h Ignore 152
User-Programmable Supplementals
Supplemental 1:
Supplemental 2:
579
580
F1h 43h
F1h 44h
000 154
UPC/EAN/JAN Supplemental Redundancy 80 50h 10 154
Decode UPC/EAN/JAN Supplemental
AIM ID
672 F1h A0h Combined 155
UPC Reduced Quiet Zone 1289 F8h 05h 09h Disable 156
Transmit UPC-A Check Digit 40 28h Enable 156
Transmit UPC-E Check Digit 41 29h Enable 157
Transmit UPC-E1 Check Digit 42 2Ah Enable 157
UPC-A Preamble 34 22h System Character 158
UPC-E Preamble 35 23h System Character 159
UPC-E1 Preamble 36 24h System Character 160
Convert UPC-E to A 37 25h Disable 161

Zebra RS6000 Specifications

General

Brand	Zebra
Model	RS6000
Category	Barcode Reader
Language	English