Zebra RS6000 - Symbology-Specific Security Levels; Redundancy Level; Redundancy Level 1; Redundancy Level 2

To Next Page

To Previous Page

Symbologies

239

Symbology-Specific Security Levels

Redundancy Level

Parameter # 78 (SSI # 4Eh)

The RS6000 offers four levels of decode redundancy. Select higher redundancy levels for decreasing levels of bar

code quality. As redundancy levels increase, the RS6000’s aggressiveness decreases.

Select the redundancy level appropriate for the bar code quality.

Redundancy Level 1

The following code types must be successfully read twice before being decoded:

Redundancy Level 2

The following code types must be successfully read twice before being decoded:

Redundancy Level 3

Code types other than the following must be successfully read twice before being decoded. The following codes

must be read three times:

Table 11 Redundancy Level 1 Codes

Code Type Code Length

Codabar 8 characters or less

MSI 4 characters or less

D 2 of 5 8 characters or less

I 2 of 5 8 characters or less

Table 12 Redundancy Level 2 Codes

Code Type Code Length

All All

Table 13 Redundancy Level 3 Codes

Code Type Code Length

MSI 4 characters or less

D 2 of 5 8 characters or less

I 2 of 5 8 characters or less

Codabar 8 characters or less

Other manuals for Zebra RS6000