Miscellaneous Imager Options
124
Picklist Mode
Parameter # 402 (SSI # F0h 92h)
Picklist mode enables the RS6000 to decode only bar codes that are aligned under the LED aiming dot. Select one
of the following picklist modes for the RS6000:
• Disabled Always - Picklist mode is always disabled.
• Enabled in Hand-Held Mode - Picklist mode is enabled in hand-held mode.
*Disabled Always
(0)
Enabled in Hand-Held Mode
(1)
Enabled Always
(2)
NOTE: Picklist Mode temporarily overrides the Disable Decode Aiming Pattern parameter. You can not disable
the decode aiming pattern when Picklist Mode is enabled.
To Next Page
Loading...