OCR Programming
256
OCR Lines
Parameter # 691 (SSI # F1h B3h)
To select the number of OCR lines to decode, scan one of the following bar codes. Selecting Visas, TD1, or TD2 ID
cards automatically sets the appropriate OCR Lines. Also see OCR-B Variant on page 250.
OCR Minimum Characters
Parameter # 689 (SSI # F1h B1h)
To select the minimum number of OCR characters (not including spaces) per line to decode, scan the following bar
code, then scan a three-digit number between 003 and 100 using the bar codes in Alphanumeric and Numeric Bar
Codes representing the number of OCR characters to decode. Strings of OCR characters less than the minimum
are ignored. The default is 003.
*OCR 1 Line
(1)
OCR 2 Lines
(2)
OCR 3 Lines
(3)
OCR Minimum Characters
To Next Page
Loading...