17
Getting Started
Introduction
This chapter describes the features of the RS6000 Ring Scanner and explains how to install and charge the
battery, capture data and reset the RS6000.
Unpacking
Carefully remove all protective material from around the equipment and save the shipping container for later
storage and shipping.
After opening the shipping box, inspect the contents. You should have received the following:
• RS6000
• Battery
• Regulatory Guide.
Inspect the equipment for damage. If you are missing any equipment or if you find any damaged equipment,
contact the Zebra Support immediately. See Service Information on page 15 for contact information.
To Next Page
Loading...