OCR Programming
253
Enable/Disable MICR E13B
Parameter # 682 (SSI # F1h AAh)
To enable or disable MICR E13B, scan one of the following bar codes.
MICR E 13B uses the following characters:
TOAD characters (Transit, On Us, Amount, and Dash) output as the following representative characters:
outputs as t
outputs as a
outputs as o
outputs as d
NOTE: OCR is not as secure as a bar code. To decrease OCR misdecodes and speed OCR reading, set an
accurate OCR template and character subset, and use a check digit. See OCR Subset on page 257 and OCR
Template on page 259.
NOTE: All OCR fonts are disabled by default. Enabling OCR can slow bar code decoding. Enabling more than
one OCR font could also slow OCR decoding and impact OCR decoding accuracy.
Enable MICR E13B
(1)
*Disable MICR E13B
(0)
To Next Page
Loading...
Need help?
General
