Bluetooth Communications
65
Link Supervision Timeout
Parameter # 1698
Link supervision timeout controls how quickly the RS6000 senses that the Bluetooth radio lost connection to the
remote device. A lower value helps prevent data loss at the edge of the operating range while a larger value helps
prevent disconnects due to the remote device not responding in time. If you are experiencing occasional
disconnects and the RS6000 is able to reconnect, increase the link supervision timeout value.
NOTE: The RS6000 only controls Link Supervision Timeout in Master mode.
*0.5 Seconds
2 Seconds
5 Seconds
10 Seconds
20 Seconds
To Next Page
Loading...