Zebra RS6000 User Manual

Miscellaneous Imager Options
114
Hand-Held Decode Aiming Pattern 306 F0h 32h Enable 123
Picklist Mode 402 F0h 92h Disabled Always 124
FIPS Mode 736 F1h E0h Disable
125
Continuous Bar Code Read 649 F1h 89h Disable 126
Unique Bar Code Reporting 723 F1h D3h Enable 126
Decode Session Timeout 136 88h 9.9 Sec 127
Timeout Between Decodes, Same
Symbol
137 89h 0.5 Sec 128
Timeout Between Decodes, Different
Symbols
144 90h 0.1 sec 129
Fuzzy 1D Processing 514 F1h 02h Enable 129
Decode Mirror Images (Data Matrix Only) 537 F1h 19h Auto 130
PDF Prioritization 719 F1h CFh Disable 132
PDF Prioritization Timeout 720 F1h D0h 200 ms 132
Decoding Illumination 298 F0h 2Ah Enable 133
Motion Tolerance 858 F2h 5Ah Less Motion Tolerance 134
Miscellaneous Options
Add an Enter Key N/A N/A N/A 134
Transmit Code ID Character 45 2Dh None 134
Prefix Value 99, 105 63h, 69h 7013 <CR><LF> 135
Suffix 1 Value
Suffix 2 Value
98, 104
100, 106
62h, 68h
64h, 6Ah
7013 <CR><LF> 135
Scan Data Transmission Format 235 EBh Data as is 136
FN1 Substitution Values 103, 109 67h, 6Dh 7013 <CR><LF> 138
Transmit “No Read” Message 94 5E Disable 139
Table 9 User Preferences Parameter Defaults (Continued)
Parameter
Parameter
Number
1
SSI
Number
2
Default
Page
Number
1. Parameter number decimal values are used for programming via RSM commands.
2. SSI number hex values are used for programming via SSI commands.

Zebra RS6000 Specifications

General

Brand	Zebra
Model	RS6000
Category	Barcode Reader
Language	English