Aastra Ascotel IntelliGate 2025 - Page 225

Ascotel IntelliGate 2025/2045/2065
Part 2 Routing elements 225
1. When direct dial numbers are created, call distribution elements are assigned automatically
2. Several direct dial numbers can be allocated to one call distribution element.
3. For performance reasons unused call distribution elements should be deleted.
Fig. 2.35: Linking direct dial numbers with call distribution elements
Destinations can be allocated to the linked call distribution elements as soon as
they are created. Various options can be selected using the setting "Link matching
subscribers" (Tab. 2.20).
Tab. 2.20: Allocating CDE destinations using the setting "Link matching subscribers"
The system only provides direct dialling plans for digital network interfaces.
Other Subjects Related to Direct Dialling Plans:
Trunk group, Call distribution, Incoming traffic, Traffic in the PISN, Iden-
tification elements, Numbering plan
Parameter value Result
No A common call distribution destination can be allocated to all the DDI
numbers, depending on the switch position. Initialization value: UG 16.
Initialization value: UG 16
yes,
do not create non-matching
A DDI number will only be created if an internal subscriber with the same
number already exists. The subscriber will be allocated as the call distribu-
tion destination , whatever the switch position.
yes,
create non-matching also
All the DDI numbers of the new block will be created. If internal subscrib-
ers with the same numbers exist they will be allocated as call distribution
destination. A common call distribution destination can be allocated to all
the other DDI numbers, depending on the switch position. Initialization
value: UG 16
haz0781aaena0
200
201
202
299
1. Create
200
201
202
299
2. Allocate
3. Delete
200
201
202
299
400
2
3
4
101
3
4
101
2
101
2
DDI number
Reference
number
Call distribution
element
DDI number Call distribution
element
DDI number Call distribution
element
444
4