Ascotel IntelliGate 2025/2045/2065
Part 2 Call Routing 337
Fig. 2.94: Transit routing from the public network into the private leased-line network without
direct dialling
Tab. 2.66: Routing parameter settings
Parameter Parameter value
Trunk group 1:
• Network interfaces Network interfaces in this trunk group
• Incoming connection Number of connections allowed simultaneously
• Network type Public
• Protocol DSS1
• Direct dialling plan 1 (relevant only if a suitable DD number is found)
• Call Distribution Element 1 (reference number of a call distribution element)
Call distribution element 1:
• Destinations Switching position 1: 330 (PISN Subscriber)
• Incoming connections Number of connections allowed simultaneously
Subscriber configuration PISN SC 330:
• Route 2 (route reference number)
• Number Not relevant in this case
Network
connections
Trunk group 1 (DSS1)
-> Call distribution 1
-> Direct dialling plan 1
DD No. -
-> Call distribution 2
Direct dialling plan 1
Call distribution 1
Call distribution 2
Switch
T
T2
Exchange
Trunk group 2 (PSS1) Route 2
PISN
Subscriber config.
Subscriber config.
T
T2
Se
<- Trunk group 2
-> SC (330)
-> SC (330)
<- Network
connections
PISN subscriber 330
<- Call No. -
<- Route 2
330
222 22 30
PINX 1
PINX 1
PINX 2
haz0740aaena0
To Next Page
Loading...
