Aastra Ascotel IntelliGate 2025 - Page 694

Ascotel IntelliGate 2025/2045/2065
694 Planning a private network Part 3
Make sure the "Number" is left blank. It is used, for example , if the subscribers
are to be linked up in a virtual network.
As with the numbering method using blocks you can also create complete num-
bers as PISN subscribers for dialling by name.
Fig. 3.74: Entering a separate PISN subscriber (example)
Region selection via local area network
With this variant, too, the regions of the other systems are entered in each system.
In this case, however, a route with the region's call number is provided for each
region in the numbering plan. Simply change the call number of the routes in all
three systems:
1. Change the call number of the routes in system 1:
– Route 1-6: Call number 50
– Route 1-7: Call number 60
2. Change the call number of the routes in system 2:
– Route 2-5: Call number 40
– Route 2-7: Call number 60
3. Change the call number of the routes in system 3:
– Route 3-5: Call number 40
– Route 3-6: Call number 50
haz0805aaena0
PISN SC 60xx
-> Route 7
60210 60210 60210 210
210
PISN SC 60xx
-> Route 7
B
PINX 1 PINX 2 PINX 3
PISN SC
60220
Newton I.
-> Route 7
Newton 60220 60220
Mr Newton
220
PISN SC
60220
Newton I.
-> Route 7
B
A
A
PINX 1 PINX 2
PINX 3
SC 220
Newton I.
SC 210
Region 40 Region 50 Region 60
Region 40 Region 50 Region 60