Ascotel IntelliGate 2025/2045/2065
Part 3 Planning a private network 695
A route number prefix (exchange access prefix for the local area network) is
always truncated before the call is forwarded. As with this variant the route
number prefix is also the region prefix, the latter is lost. To ensure that a call can
nonetheless be routed to its destination via several transit systems, the regional
prefix has to be added once again.
For this enter the regional prefixes in the route configuration under "Send Access
Code":
1. Enter the regional prefixes of system 1:
– Route 1-6: Send access code = 50
– Route 1-7: Send access code = 60
2. Enter the regional prefixes of system 2:
– Route 2-5: Send access code = 40
– Route 2-7: Send access code = 60
3. Enter the regional prefixes of system 3:
– Route 3-5: Send access code = 40
– Route 3-6: Send access code = 50
With the route selection variant you cannot create complete numbers as PISN sub-
scribers. Dialling by name would have to be organized using abbreviated dialling.
You can, however, reach any internal number of any other system, regardless of
how long that number is. Assuming Mr Newton in system 3 with call number 220
has a handset with call number 5220. He can be reached by subscribers in other
systems either directly on call number 60220 or on 605220.
To Next Page
Loading...
