Aastra Ascotel IntelliGate 2025 - Page 711

Ascotel IntelliGate 2025/2045/2065
Part 4 Mounting the PBX 711
Fig. 4.5: Accessories for installation set and installation of the PBX in a 19" system cabinet
Installing the PBX into a 19" system cabinet
1. Step A: 8 Fit 8 cage nuts [7] (see Fig. 4.4). The space between the rails should
be 8 height modules on the inside (or 12 height modules on the outside).
2. Step B: Premount upper plug-in unit with parts 1, 3, 4, 6 (see Fig. 4.4).
3. Step C: Premount lower plug-in unit with parts 2, 3, 4, 6 (see Fig. 4.4).
4. Step D: Slide the mounted plug-in units into the system cabinet.
5. Step E: Use 8 screws [5] to screw the plug-in units to the system cabinet (see
Fig. 4.4).
6. Step F: 2 Loosely screw screws [6] approx. 4 mm into the upper back rails [1]
(see Fig. 4.5):
For 2025 / 2045 system use an internal thread, for 2065 system an external
thread.
7. Step D: Suspend the PBX into the loose screws and secure to the lower back
rail [2] with 2 screws [6].
F
G
haz1253aaxxa0