Ascotel IntelliGate 2025/2045/2065
792 Cabling interfaces Part 4
Settings
The same communication parameters must be set on all the connected equip-
ment. On the PA this is done using DIP switches S1... S8 (see Fig. 4.67).
Fig. 4.67: DIP switches
Connection
DIP switches S1 and S3 are used for setting the two pieces of equipment that are
to communicate with each other via the PA.
Tab. 4.48: Setting the connection
Example:
V.24 (B) ´ AD2 terminal
Connects the Office system terminal with PC or Mac
Switch S1 Switch S3 Connections
ON ON Reserve
ON OFF V.24 (B) ↔ AD2 terminal
OFF ON V.24 (A) ↔ V.24 (B)
OFF OFF V.24 (A) ↔ AD2 terminal
ON
S8
S7
S6
S5
S4
S3
S2
S1
Transmission rate
Flow control
Connection
"ON" TSD2
Connection
haz1144aaena0
To Next Page
Loading...
