ADCMT 6166 - BCD Interface (OPT6166+04); BCD Interface Overview

6166 DC Voltage Current Source Operation Manual
6.5 BCD Interface (OPT6166+04)
6-22
Press or to select the parameter.
The highlight section switches as Bus  Id.
Example display
Press to move to the Input/Run level.
Example display
Set the USB ID by rotating the rotary knob.
Example display
Press to exit the menu screen.
6.5 BCD Interface (OPT6166+04)
6.5.1 BCD Interface Overview
The BCD parallel interface can be installed optionally on the 6166.
The following five functions can be controlled in parallel via the 50-pin connector on the rear panel.
(1) Setting the output value (10
0
to 10
6
).
(2) Switching the function between voltage, current and divider voltage (10 mV, 100 mV, 1000 mV).
(3) Switching the polarity
(4) Setting the limit level
(5) Switching between Operate and Standby
4
5
6
7