6166 DC Voltage Current Source Operation Manual
4.2.18 PROGRAM Key (Switching to and Releasing Program Function)
4-9
4.2.18 PROGRAM Key (Switching to and Releasing Program Function)
Sets the program function to ON or OFF.
The PROGRAM key lights up when the program function is set to ON.
Program OFF: Normal voltage and current output
Program ON: Outputs the source values saved in the program memory of 1000 data according to the setting
conditions.
In the program function, the source values in the memory are recalled by the following two methods:
For more information on the program function, refer to Section 3.8, "Program Function."
4.2.19 RECALL key (Memory Recall)
Switches to the memory recall operation that recalls an arbitral memory address when the program func-
tion is set to ON.
Selects a digit of the source value to be changed when the program function is set to OFF.
4.2.20 SAVE Key (Memory Setting Saving)
Saves the program memory data to the non-volatile memory when the program function is set to ON.
Selects a digit of the source value to be changed when the program function is set to OFF.
4.2.21 UP Key (Source Range UP)
Increases the source range by one step.
When auto range is selected, increasing the source range cancels the auto range setting.
Recall method Function
Memory recall Recalls a specified memory number arbitrarily.
Memory scan Recalls the program memory from the first number to
last number in order.
To Next Page
Loading...
Need help?
General
