ADCMT 6166 User Manual

6166 DC Voltage Current Source Operation Manual
3.8.4 Recalling Program Memory
3-43
3.8.4 Recalling Program Memory
Recall is a method to call the program memory by specifying an arbitrary memory number.
The following is an example to recall and output the data set in Section 3.8.2, "Setting Program Memory."
Operating procedure
Check that the source value screen is displayed.
If the menu screen, limit setting screen or numeric keypad input screen is displayed, press the EXIT
key.
If the program function has been already enabled, go on to Step .
Press . The program function is enabled and the program screen is displayed.
While the program screen is displayed, the PROGRAM key lights up.
In this example, 11 V in the 10 V range is set in memory number 0.
Example display Program screen
Press . The memory recall screen is displayed.
Example display Memory recall screen
2 3 651 47 8
9
10
1
3
2
3

ADCMT 6166 Specifications

General

Brand	ADCMT
Model	6166
Category	Measuring Instruments
Language	English