6166 DC Voltage Current Source Operation Manual
1.11 Product Disposal and Recycling
1-13
1.11 Product Disposal and Recycling
Correctly dispose of the 6166 in accordance with local and national regulations.
Before disposal, remove the following parts from the product to prevent dispersal of substances that may
adversely affect the environment, human health, or the ecosystem.
NOTE: For assistance with locating a waste disposal company, contact an ADC CORPORATION sales represen-
tative.
Name of substance or removed part Used? Location Unit Part
Capacitor containing polychlorinated biphenyls
(PCBs)
No -
Part containing mercury No
-
Battery No
-
Printed circuit boards Yes Unit Main
DIV
ANALOG
HV POWER
Printed circuit boards
Toner cartridge No -
Plastic containing brominated flame retardants Yes Unit BLN-009001
BLR-008004
BLB-009002
BLR-008007
BLJ-009003
Connectors, diodes, Zener
diodes, FET, analog ICs,
logic ICs, FLASH mem-
ory, transistors, infrared
ray LEDs
Parts containing asbestos No -
Cathode-ray tubes No -
Chloroflourocarbon (CFC), hydrochlorofluoro-
carbon (HCFC), hydrofluorocarbon (HFC), or
hydrocarbon (HC)
No -
Electric-discharge indicator No -
LCD display of 100 cm
2
or larger
No -
Connecting cable Yes Between
units
Power cable
Parts containing flame-resistant ceramic fibers Yes - Output terminal section
Parts containing radioactive material No -
Electrolytic capacitors containing substance of
concern
(With height > 25 mm, dia. > 25 mm, or equiv-
alent volume)
No -
Arsenic or its compounds Yes Unit Electronic
components
logic ICs, infrared ray
LEDs
To Next Page
Loading...
Need help?
General
