ADCMT 6166 User Manual

6166 DC Voltage Current Source Operation Manual
6.6.4 Remote Command List
6-32
6.6.4 Remote Command List
1. The Default column shows default settings at Power ON or at factory shipment.
• The Power ON column shows the status when the power is turned ON.
2. The Operation column shows the following:
• Divider function : Indicates enabled or disabled when the divider function is
selected.
• Thermal electromotive function : Indicates enabled or disabled when the thermal electromotive
force function is selected.
• Scan stopped : Indicates enabled or disabled while repeat scan is stopped.
• Scan running : Indicates enabled or disabled while repeat scan is running or
paused.
• CAL : Indicates when the calibration mode is set to ON.
Class Item Command Description
Default Operation
Power
ON
Factory
shipment
Divider
function
Thermal
electrom
otive
force
function
Scan
stopped
Scan
running
CAL
Source Output OPR Operate
SBY Standby
EOperate
H Standby
OPR? Response: During Operate: OPR
SBY? During Standby: SBY
Program func-
tion
MD0 Program OFF
--
MD4 Program ON
MD? Response: MD0 or MD4
Source function VF Voltage source
DF Divider voltage source
IF Current source
TF Thermal electromotive force source
VF? Query of voltage and current functions
DF? Response:
IF? SVR4 to SVR7, SDR2 to SDR4,
TF? SIR 1 to SIR 3

ADCMT 6166 Specifications

General

Brand	ADCMT
Model	6166
Category	Measuring Instruments
Language	English