6166 DC Voltage Current Source Operation Manual
6.6.4 Remote Command List
6-34
Source Thermocouple
type
TC1 Thermocouple type T, thermal electro-
motive force output (CC)
---
TC2 Thermocouple type J, thermal electro-
motive force output (IC)
TC3 Thermocouple type E, thermal electro-
motive force output (CRC)
TC4 Thermocouple type K, thermal electro-
motive force output (CA)
TC5 Thermocouple type S, thermal electro-
motive force output (PR10)
TC6 Thermocouple type R, thermal electro-
motive force output (PR13)
TC7 Thermocouple type B, thermal electro-
motive force output (PR30)
TC8 Thermocouple type N, thermal electro-
motive force output (N)
When TC8 (type N) is specified, JSV0
will be applied even if JSV1 (JIS
C1602-1981) is selected.
TC? Query of the type of thermocouple
Response: TC1 to TC8
Reference junc-
tion tempera-
ture
TMCdata Reference junction temperature setting
for thermal electromotive force output
0ï€ ï‚°C--
Unit: ï‚°C
TMC? Query of reference junction temperature
for thermal electromotive force output
Response: TMCdddd.dE+d (5 digits)
Selection of
thermocouple
standard
JSV0 Thermocouple JIS standard C1602-
1995 (new)
--
JSV1 Thermocouple JIS standard C1602-
1981 (old)
When TC8 (type N) is specified, JSV0
will be applied even if JSV1 (JIS
C1602-1981) is selected.
JSV? Query of thermocouple standard
Response: JSV0 or JSV1
Voltage source
value
SOVdata Voltage source value setting *1
- Numeric values below the lowest
digit in each range are rounded off.
0 ----
SOV? Query of voltage source value *2
SOVd.ddddddEd (7 digits)
*1: The setting range of the source value varies depending on the model, range or function. For more information, refer to Chapter 9,
"SPECIFICATIONS."
*2: The position of the decimal point varies depending on the model, range or function.
Class Item Command Description
Default Operation
Power
ON
Factory
shipment
Divider
function
Thermal
electrom
otive
force
function
Scan
stopped
Scan
running
CAL
To Next Page
Loading...
Need help?
General
