ADCMT 6166 User Manual

6166 DC Voltage Current Source Operation Manual
A.2 Error Message List
A-5
Self test
241
10 V range +FULL error 10 V Check +FULL
242
10 V range -FULL error 10 V Check -FULL
243
100 V range +FULL error 100 V Check +FULL
244
100 V range -FULL error 100 V Check -FULL
245
1000 V range +FULL error 1000 V Check +FULL
246
1000 V range -FULL error 1000 V Check -FULL
247
1 mA range ZERO error 1 mA Check Zero
248
10 mA range ZERO error 10 mA Check Zero
249
100 mA range ZERO error 100 mA Check Zero
250
Fan stop Fan Stop Alarm Check
260
Overvoltage detection (OVL) Over Load Alarm Check
270
Overheat detection (OVH) Over Heat Alarm Check
Hardware error
400
Source unit circuit error Source Unit Error
401
Fan stop alarm Fan Stop Alarm
402
Overheat alarm Over Heat Alarm
403
Overload alarm Over Load Alarm
Source condition
error
831
Output disabled by interlock Interlock
Command error
-102
Command syntax error Cmd Syntax
-113
Unsupported command Undefined header
-200
Command currently not executable Execution error
-222
Out-of-range parameter setting Data out of range
System
-313
Calibration data is lost. Calibration memory lost
-314
Data saved by the *SAV command is lost. Save/recall memory lost
-315
Saved setting data is lost. Configuration memory lost
-330
Self test error Self-test failed
701
Divider ON in 1000 V range (in BCD remote) Divider in 1000 V
702
1000 V range in IS (in BCD remote) Illegal range in IS
703
Divider ON in IS (in BCD remote) Divider in IS
704
Illegal BCD value (in BCD remote) Illegal BCD value
USB communica-
tion
150
USB communication error Illegal packet received
Table A-2 Error Message List (2 of 2)
Classification Error code Description
ERR? command response

ADCMT 6166 Specifications

General

Brand	ADCMT
Model	6166
Category	Measuring Instruments
Language	English