EasyManuals Logo
Home>ADCMT>Measuring Instruments>6166

ADCMT 6166 User Manual

ADCMT 6166
274 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
Safety-1
Safety Summary
FOE-ANZENA01
To ensure thorough understanding of all functions and to ensure efficient use of this instrument, please read the
manual carefully before using. Note that ADC Corporation (hereafter referred to as ADC) bears absolutely no re-
sponsibility for the result of operations caused due to incorrect or inappropriate use of this instrument.
If the equipment is used in a manner not specified by ADC, the protection provided by the equipment may be im-
paired.
Warning Labels
Warning labels are applied to ADC products in locations where specific dangers exist. Pay care-
ful attention to these labels during handling. Do not remove or tear these labels. If you have any
questions regarding warning labels, please ask your nearest ADC dealer. Our address and phone
number are listed at the end of this manual.
Symbols of those warning labels are shown below together with their meaning.
DANGER: Indicates an imminently hazardous situation which will result in death or serious
personal injury.
WARNING: Indicates a potentially hazardous situation which will result in death or serious
personal injury.
CAUTION: Indicates a potentially hazardous situation which will result in personal injury or
a damage to property including the product.
Basic Precautions
Please observe the following precautions to prevent fire, burn, electric shock, and personal inju-
ry.
Use a power cable rated for the voltage in question. Be sure however to use a power cable
conforming to safety standards of your nation when using a product overseas.
When inserting the plug into the electrical outlet, first turn the power switch OFF and then
insert the plug as far as it will go.
When removing the plug from the electrical outlet, first turn the power switch OFF and then
pull it out by gripping the plug. Do not pull on the power cable itself. Make sure your hands
are dry at this time.
Before turning on the power, be sure to check that the supply voltage matches the voltage
requirements of the instrument.
Connect the power cable to a power outlet that is connected to a protected ground terminal.
Grounding will be defeated if you use an extension cord which does not include a protective
conductor terminal.
Be sure to use fuses rated for the voltage in question.
Do not use this instrument with the case open.
If there is any abnormality such as abnormal heart, smoke, smell or noise, immediately stop
using the instrument, turn off the power and disconnect the plug from the outlet.
Safety Summary

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ADCMT 6166 and is the answer not in the manual?

ADCMT 6166 Specifications

General IconGeneral
BrandADCMT
Model6166
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals