ADCMT 6166 User Manual

6166 DC Voltage Current Source Operation Manual
3.8.5 Setting Program Memory Scan Operations
3-46
Operating procedure
Check that the source value screen is displayed.
If the menu screen, limit setting screen or numeric keypad input screen is displayed, press the EXIT
key.
If the program function has been already enabled, go on to Step .
Press . The program function is enabled and the program screen is displayed.
While the program screen is displayed, the PROGRAM key lights up.
In this example, the scan operation is set to Hold.
Example display Program screen
Press . The scan operation is switched to Single.
Example display Program screen
Press . The scan operation is switched to Repeat.
Example display Program screen
Similarly, every pressing switches the scan operation as Hld  Sng  Rpt.
To terminate the program function and return to the source value screen, press or
.
1
3
2
Shows that the scan operation is set to Hold.
3
Shows that the scan operation is set to Single.
4
Shows that the scan operation is set to Repeat.

ADCMT 6166 Specifications

General

Brand	ADCMT
Model	6166
Category	Measuring Instruments
Language	English