9500 MXC User Manual
3DB 23063 ADAA - Rev 004 July 2007 Vol. VI-C-3
Figure C-2 shows the cable label data.
Figure C-2. Unbalanced Cable Label Data
Label arrow towards the
BNC shows data out
(DAC Tx)
Label arrow away from
the BNC shows data in
(DAC Rx)
The 1/9 in the label indicates it is for trib 1 if the cable assembly
is used with the trib 1-8 connector, or trib 9 if used with the
trib 9-16 connector. Similarly for 2/10, 3/11 etc, up to 8/16.
DATA1/9
DATA1/9
To Next Page
Loading...
