236 Rockwell Automation Publication 5069-UM002A-EN-P - January 2019
Chapter 10 Commercial Operating System
To install the Windows Kit, complete the following steps:
1. Verify the following:
• The network connection is made.
• The network driver has been configured in RSLinx Classic software.
• The controller is in Remote Program or Program mode and all major
recoverable faults are cleared.
2. Start the ControlFLASH software.
3. Click Next.
IMPORTANT At different points in the process, there can be delays that are typically not
experienced when you install controller firmware in the tradition manner,
that is, as is used with other Logix 5000 controllers.
During the delays, the software dialog boxes can appear as if no activity is
occurring.
This is normal operation. Do not take action, such as closing the software.
Rather, patiently wait and take the next action when possible.