Rockwell Automation Publication 5069-UM002A-EN-P - January 2019 113
Use the Secure Digital Card Chapter 4
Other Secure Digital Card Tasks
You can use the SD cards to complete the following other tasks:
• Change the image that is loaded from the card
• Check for a load that was completed
• Clear an image from the SD card
• Store an empty image
• Change load parameters
• Read/write application data to the card
• Use the controller logging feature
For more information on the controller logging feature, see the
Logix 5000™ Controllers Information and Status Programming Manual,
publication
1756-PM015.
For information on how to use an SD card, see the Logix5000™ Controllers
Nonvolatile Memory Card Programming Manual, publication
1756-PM017.
To Next Page
Loading...
