Rockwell Automation Publication 5069-UM002A-EN-P - January 2019 85
Start to Use the Controller Chapter 3
Download a Project to
the Controller
When you download a project to the controller, it copies the project from the
Logix Designer application onto the controller. You can download a project in
two ways:
•
Use the Who Active Dialog Box to Download on page 85
•
Use the Controller Status Menu to Download on page 86
Use the Who Active Dialog Box to Download
You can use the features of the Who Active dialog box to download to the
controller after you have set the communication path. Complete the following
steps to download to the controller.
1. In the Who Active dialog box, choose the communication path and
click Download.
TIP In this section, an Ethernet port is the communication path. You can also use
the USB port.
To Next Page
Loading...
Need help?
General
