AMX NetLinx Studio - Preferences Dialog - File Transfer Tab

Setting Program Preferences
207
NetLinx Studio - Instruction Manual
Preferences dialog - File Transfer tab
Use the options on the File Transfer tab of the Preferences dialog to set default preferences for file transfer operations
(FIG. 292).
FIG. 292 Preferences dialog - File Transfer tab
File Transfer options
File Transfer Options
Automatically select reboot when sending a TKN file. (default = enabled)
When sending a TKN, automatically send the associated SRC. (default = enabled)
Automatically choose "Smart Transfer" when sending a TP4 file (default = disabled)
By default, select "Send Bitmaps" when sending a TPD file (default = enabled)
By default, select "Send Icons" when sending a TPD file (default = enabled)
By default, select "Send Fonts" when sending a TPD file (default = enabled)
By default, connect directly to a touch panel (no master) whenever transferring TPD files (only
available for Serial connections)
(default = disabled)
Show "Load List" Summary (default = enabled)
By default, select "Send Glyph" when sending a KPB file (default = disabled)
By default, select "Send Font" when sending a KPB file (default = disabled)