AMX NetLinx Studio User Manual

Working with System Files
52
NetLinx Studio - Instruction Manual
Minimum Support Requirements for Duet Modules
NetLinx Studio v2.3
NetLinx Master Firmware build 304
Creating a New Module File
To create a new Module file (that is not associated with a System).
1. Click File > New, and select Module File in the New dialog (FIG. 97).
2. Click OK to close this dialog and open the File Template dialog (FIG. 98).
3. Select Ye s (default) or No, and click Next to proceed.
If you select Yes, click Next to proceed to the next File Template dialog (see Step 4).
If you select No, click Next to proceed to the New File Location dialog (see Step 6).
4. In this dialog, select a module template to use to create the file (NetLinx Module Template or User-Defined
Template), and click Next to proceed. (FIG. 99).
Refer to the Cafe Duet online help file for details on creating JAR module files.
FIG. 97 New dialog - Module File selected
FIG. 98 File Template dialog

AMX NetLinx Studio Specifications

General

Brand	AMX
Model	NetLinx Studio
Category	Software
Language	English