AMX NetLinx Studio User Manual

Working with System Files
53
NetLinx Studio - Instruction Manual
If you select to use the NetLinx Module template, the new Module file will include all of the sections and
headings (i.e. DEFINE_DEVICE, DEFINE_CONSTANT, DEFINE_TYPE, etc.) that differentiate the
various sections contained in a typical NetLinx Module file.
If you select User Defined Template, enter the file path for the AXS, AXI, AXB (or other) file to be used as
the file template. Use the Browse (...) button to locate and select the file via the Open dialog.
5. In this File Template dialog, enter a file name for the new Module file, and click Next to proceed (FIG. 100).
6. In the New File Location dialog, specify a target directory for the file.
By default, the target directory is the NetLinx Studio directory.
Use the Browse (...) button to navigate to another folder if necessary. (FIG. 101).
7. Click Next to proceed to the final File Template dialog which notifies you that the file was created (FIG. 102).
8. Click Finish to close the File Template dialog.
FIG. 99 File Template dialog
FIG. 100 File Template dialog
FIG. 101 New File Location dialog

AMX NetLinx Studio Specifications

General

Brand	AMX
Model	NetLinx Studio
Category	Software
Language	English