AMX NetLinx Studio User Manual

Working with System Files
55
NetLinx Studio - Instruction Manual
If you select Ye s, click Next to proceed to the next File Template dialog (see Step 4).
If you select No, click Next to proceed to the New File Location dialog (see Step 5).
4. In this dialog, select a template to use to create the file (NetLinx Module Template or User-Defined Template), and
click Next to proceed (FIG. 106).
If you select NetLinx Module Template, the new Module file will include all of the sections and headings (i.e.
DEFINE_DEVICE, DEFINE_CONSTANT, DEFINE_TYPE, etc.) that differentiate the various sections
contained in a typical Module file for the indicated system type.
If you select User Defined Template, enter the file path for the AXS, AXI, AXB (or other) file to be used as
the file template. Use the Browse (...) button to locate and select the file via the Open dialog.
5. In this File Template dialog, enter a file name for the new file (FIG. 107).
6. In the New File Location dialog, specify a target directory for the file.
By default, the target directory is the NetLinx Studio directory.
Use the Browse (...) button to navigate to another folder if necessary. (FIG. 108).
FIG. 106 File Template dialog
FIG. 107 File Template dialog

AMX NetLinx Studio Specifications

General

Brand	AMX
Model	NetLinx Studio
Category	Software
Language	English