Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
2 Air Spring Suspension Settings -Ve‐
hicle Diagnostic Tester- , Connecting
and Selecting Functions
⇒ “2.1 Suspension Levels”, page 209
⇒ “2.2 Vehicle Level, Adjusting”, page 209
⇒ “2.3 Vehicle Lift Mode”, page 209
⇒ “2.4 Trailer Mode”, page 210
⇒ “2.5 Cargo Mode”, page 211
⇒ “2.6 Vehicle Diagnostic Tester , Connecting and Selecting
Functions”, page 211
2.1 Suspension Levels
The driver can select six different level settings:
♦ Lift
♦ Offroad
♦ Comfort
♦ Automatic
♦ Dynamic
♦ Cargo level
Note
The automatic control procedures depend on speed and time. For
example, above a certain speed, chassis cannot be raised to
highest level.
More details about level settings, refer to the Owner's Manual.
2.2 Vehicle Level, Adjusting
Vehicle level is set in MMI.
– Turn on the ignition.
– Press “CAR” function button. “adaptive air suspension” main
menu appears.
– Use the control knob to select the level.
Note
Note that not every vehicle level can be selected in every driving
situation.
More details about vehicle level, refer to the Owner's Manual.
2.3 Vehicle Lift Mode
Before raising vehicle with vehicle jack or hoist, vehicle lift mode
must be activated so that the air suspension automatic control
procedures do not create difficulties when raising with vehicle jack
or hoist.
Audi Q7 2007 ➤
Suspension, Wheels, Steering - Edition 01.2014
2. Air Spring Suspension Settings Vehicle Diagnostic Tester , Connecting and Selecting Functions 209
To Next Page
Loading...
