Audi Q7 2007 User Manual

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
5 Power Steering Pump, Hydraulic
Pipes and Reservoir
⇒ “5.1 Power Steering Pump, Hydraulic Pipes and Reservoir
Overview”, page 313
⇒ “5.2 Lines and Hoses Overview”, page 316
⇒ “5.3 Power Steering Pump Delivery Pressure, Generation I
without SCR, Checking”, page 318
⇒ “5.4 Power Steering Pump Delivery Pressure, Generation I with
SCR and Generation II, Checking”, page 322
⇒ “5.5 Power Steering Pump, Removing and Installing”,
page 326
5.1 Power Steering Pump, Hydraulic Pipes and Reservoir Overview
Vane pump is not designed to be serviced. If there are customer
complaints, the cause must be determined using a pressure and
leak test. If there is a malfunction, replace the vane pump.
Note
♦ If power steering fluid is low in reservoir, check steering system for leaks.
♦ If there are leaks in the area of the line connections, the lines/connections must first be inspected for leaks,
tightened as necessary and wiped dry.
♦ Pump is delivered without oil. Therefore, Hydraulic Oil must be filled before installation and turned by hand.
Otherwise, noises when driving or damage to pump may occur.
Audi Q7 2007 ➤
Suspension, Wheels, Steering - Edition 01.2014
5. Power Steering Pump, Hydraulic Pipes and Reservoir 313

Audi Q7 2007 Specifications

General

Brand	Audi
Model	Q7 2007
Category	Automobile
Language	English