Audi Q7 2007 - Power Steering Pump Delivery Pressure, Generation I Without SCR, Checking

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Return Hose Clips to Refrigerant Line
– Secure return hose -1- with clips -2- and -4- to refrigerant line
-3-.
Hoses to Hydraulic Oil Cooler
– Attach return line -4- to line -1- and return hose -6- to line -7-.
– Markings -5- on return line -4- and return hose -6- must align
with markings -2-. Secure return line -4- and return hose -6-
with hose clamps -3-.
Return Line Bracket to Subframe, Return Line to Coolant Hoses
– Secure return line -3- with line brackets -1- to subframe -2-.
– Secure return line -3- with bracket -5- to coolant hoses -4-.
5.3 Power Steering Pump Delivery Pres‐
sure, Generation I without SCR, Check‐
ing
Special tools and workshop equipment required
♦ Hose Clamps - Up To 25mm - 3094-
Audi Q7 2007 ➤
Suspension, Wheels, Steering - Edition 01.2014
318 Rep. Gr.48 - Steering