Audi Q7 2007 - Lines and Hoses Assembly Overview, Vehicles with V12 TDI Engine

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
18 - Clip
❑ Quantity: 3
19 - Expanding Rivet
20 - Clip
❑ Quantity: 2
21 - Expanding Rivet
22 - Clip
23 - Return Line
❑ Note the installed position on the longitudinal member, refer to ⇒ page 380
❑ secure ⇒ page 380
24 - Clip
25 - Bracket
❑ for the return lines
26 - Wiring bracket
27 - Nut
❑ 9 Nm
28 - Return hoses
29 - Clip
9.2 Lines and Hoses Assembly Overview,
Vehicles with V12 TDI Engine
Line and hose securing elements, assembly overview
1 - Installed position, return line to the subframe and coolant
hoses ⇒ page 381
2 - Installed position, pressure line to ATF pipes ⇒ page 381
3 - Installed position, return line to steering gear ⇒ page 381
4 - Location of hoses on reservoir and reservoir bracket to body
⇒ page 381
5 - Installed position, return line clip to body ⇒ page 382
6 - Installed position, return line clips to refrigerant line
⇒ page 382
7 - Installed position, intake hose to power steering pump
⇒ page 382
8 - Installed position, return lines to left longitudinal member
⇒ page 382
Audi Q7 2007 ➤
Suspension, Wheels, Steering - Edition 01.2014
380 Rep. Gr.48 - Steering