Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Secure against turning with counterhold -1- (for example, a 2
mm drill bit).
– Press the tire pressure sensor -1- into bed and fasten at rear
of valve with microencapsulated screw, refer to -Item 6-
⇒ Item 6 (page 244) .
Audi Q7 2007 ➤
Suspension, Wheels, Steering - Edition 01.2014
246 Rep. Gr.44 - Wheels, Tires, Wheel Alignment
To Next Page
Loading...
