Audi Q7 2007 - Page 359

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Return line clip to refrigerant line, return line to refrigerant line
bracket
– Secure return line -1- with clip -2- two times on refrigerant line
-3-.
– Secure return line -1- with line bracket -4- to refrigerant line
bracket -5-.
Intake hose to engine
– Attach the left front intake hose -2- to the engine. Tighten the
bolt -1- to 9 Nm.
Return line clip to coolant line
– Secure the return line -1- with clip -2- two times on coolant line
-3-.
Hoses to hydraulic oil cooler
– Attach return line -4- to line -1- and return hose -6- to line -7-.
– Markings -5- on return line -4- and return hose -6- must align
with markings -2-. Secure return line -4- and return hose -6-
with hose clamps -3-.
Audi Q7 2007 ➤
Suspension, Wheels, Steering - Edition 01.2014
7. Power Steering Pump, Hydraulic Pipes and Reservoir, Vehicles with V8 TDI Engine 351