103R5910032 /00 Freya
Image 7–54
Each item has a complete lens description (reference 1). Reference number (reference 2) of the lens is
displayed just under this description. When a lens type is activated the status (reference 3) turns to Active and
the reference number of the lens is noticed on top of the list.
Click Active (reference 4) allows to activate the lens type.
Click calibrate (reference 5) located on top of the list allows to display calibrate panel in order to realize a lens
calibration or consult the calibration history (overview on the last performed calibration).
7.3.2 Activating a lens
Location & access
Menu: Configuration > Projector > Lens selection
Level: Administrator, Service technician
How to activate
1. While in Configuration > Projector > Lens selection, click on the activate icon located in the right corner of
the desired lens type.
Image 7–55
The lens type is now activated :
• Reference number of the lens is noticed on top of the list (reference 1).
• Status (reference 2) turns to Active.
Configuration - Projector
To Next Page
Loading...
Need help?
General
