Barco Freya - Input File Editor; HDSDI (3 G-SDI) for ICMP

135R5910032 /00 Freya
Image 7–108
3. Fill the input file parameters. For more information about the input file editor, see “Input file editor”, page
135.
4. Click Save As (reference 3) to display the Save As window.
3
4
5
Image 7–109
5. Enter a name (reference 4).
Note: List of files already available in the projector is displayed in this window. Directly click on
this list allows you to reuse all or part of an already existing file name.
6. Click save (reference 5).
Note: If the name enter in the previous step already exists, a confirmation window is displayed
to confirm that you want to overwrite the file.
New 3D file is added to the 3D files list.
7.6.3 Input file editor
About this chapter
This chapter contains all the necessary information to use input file editor, the Web Communicator page used
to create or modify input files.
7.6.3.1 HDSDI (3G-SDI) for ICMP
How to adjust HDSDI (3G-SDI) parameters for ICMP
1. While in input file editor, click HDSDI (reference 1).
Configuration - Projector