R5910032 /00 Freya180
The calibration file is displayed in its expanded form with menu.
Image 8–11
2. Click the Edit icon.
Edit window is displayed.
Image 8–12
3. eidt the desired values.
Note: Please refer to section “Creating a new light sensor calibration file”, page 177 to correctly
modify a light sensor calibration file parameters.
4. Click Save (reference 2) to save all modifications under the same name.
or
Click Save as (reference 3) to save the current modifications under a different name.
8.1.6 Renaming a light sensor calibration file
How to change the name of a light sensor calibration file
1. In the Light sensor calibration menu, click on the desired LSC file.
Image 8–13
The calibration file is displayed in its expanded form with menu.
Configuration - Light output
To Next Page
Loading...
