Barco Freya - Light Source On-Off; Light Source Power Increase-Decrease; Dowser Open-Close

R5910032 /00 Freya64
6.2.2 Light Source on-off
Location & access
Menu: Control > Projector > Light, dowser, lens
Level: Administrator, Service technician, Show manager
How to switch on or switch off the projector light source
1. Click on the projector light source button to switch on or switch off the projector light source.
Button State
Projector light
Button color Status icon
On On Green
Light is On
Off Off White Light is Off
6.2.3 Light Source power increase-decrease
Location & access
Menu: Control > Projector > Light, dowser, lens
Level: Administrator, Service technician, Show manager
How to increase or decrease light source power
1. Power buttons allow to change intensity of the light source.
Use the plus button to increase the light source power.
or
Use the minus button to decrease the light source power.
Intensity of the light source changes.
Image 6–5
The minimum light source power is limited to 20%.
6.2.4 Dowser open-close
Location & access
Menu: Control > Projector > Light, dowser, lens
Level: Administrator, Service technician, Show manager
This dowser on the projector is not a mechanical dowser, but a software functionality.
Control - Projector