R5910032 /00 Freya284
15.1 System information
Location & access
Menu: Diagnostics > Monitoring > System information
Level: Administrator, Service technician, Show manager
Overview
This panel provides information concerning the product (projector + Cinema processor) and network
configuration.
This panel is read only. To modify Network parameters displayed here, please use “Network
configuration”, page 256.
Image 15–1
Product information
• Model : Indicates the Model of the projector (e.g. DP4K-xx).
• Article number: Indicates article number of the projector (e.g. R90xxxxx).
• Projector serial number: Indicates the serial number of the projector.
• ICMP/ICP serial number: Indicates the serial number of the ICMP (Integrated Cinema Media Processor)
or ICP (Integrated Cinema Processor) present in the projector.
• Firmware version: Indicates the software package version installed on the device.
Network information
• Host name: Contains the host name assigned to the projector to identify it in the theater network (e.g.
projector1).
• IP address: Contains the IP address of the projector required for network communication (e.g.
10.98.0.245).
• Subnet: The subnet mask is the number that is used to identify a subnet so that IP addresses can be
shared on a local area network (e.g. 255.255.254.0).
• Default gateway: Contains the default gateway IP address of the projector (router) required for network
communication (e.g. 10.98.0.1).
• Configuration: MANUAL or AUTO. Indicates if the IP address has been assigned manually by user or
automatically by DHCP (Dynamic Host Configuration Protocol) server.
Diagnostics - Monitoring
To Next Page
Loading...
