R5910032 /00 Freya76
7.1 Macros configuration
7.1.1 About macro configuration
Location & access
Menu: Configuration > Projector > Macros
Level: Administrator, Service technician
Overview
This panel allows to manage macros of the projector.
1 2 3
4
98765
12
13
14
15
10 11
16
17
Image 7–1
Each macro displayed here has a title (reference 1). If a macro is associated with a preset button (projector
keypad), the preset number (reference 2) is specified on the macro. For more details concerning link to preset
buttons, please refer to chapter “Linking a macro to preset button”, page 87.
Click on a macro (reference 4) in this list allows to show it in its expanded form and displays a contextual
menu.
Following actions are available in this menu:
• Save as cue (reference 5) allows to create a cue on the ICMP.
• Execute (reference 6) allows to activate the macro. During its execution, the status of the macro
(reference 3) turns to BUSY. When the macro is completed, the status of the macro (reference 3) turns to
EXECUTED.
• Export (reference 7) creates a downloadable backup package.
• Link/Unlink to preset (reference 8) allows to link or unlink the macro with preset button of the projector
keypad.
• Edit (reference 9) allows to modify the macro.
• Rename (reference 10) allows to modify the name of the macro.
• Delete (reference 11) allows to remove the macro from the list.
Clicking on menu (reference 12) displays the macro general menu.
Following actions are available in this menu:
• New (reference 13) allows to create a new empty macro.
• New from active state (reference 14) allows to create a new macro pre-filled with commands
corresponding to current projector state.
• Import (reference 15) allows to import macro.
Configuration - Projector
To Next Page
Loading...
Need help?
General
