Barco Freya - Deleting a Light Sensor Calibration File; Editing a Light Sensor Calibration File

179R5910032 /00 Freya
1
2
Image 8–7 LSC file is activated
8.1.4 Deleting a light sensor calibration file
How to delete a light sensor calibration file
1. In the Light sensor Calibration menu, select the undesired light sensor calibration file.
Image 8–8
The calibration file is displayed in its expanded form with menu.
Image 8–9
2. Click the Delete icon in the menu and confirm with OK.
The calibration file is removed from the list
8.1.5 Editing a light sensor calibration file
If you want to edit an LSC file, make sure you comply to the same prerequisites as when creating
this LSC file. For more info, refer to “Creating a new light sensor calibration file”, page 177.
If you only want to rename the LSC file, see the following procedure instead: “Renaming a light
sensor calibration file”, page 180.
How to edit a light sensor calibration file
1. In the Light Sensor Calibration menu, select the desired LSC file.
Image 8–10
Configuration - Light output