271R5910032 /00 Freya
Image 14–15
2. Click the Edit icon.
PIN code editor page is displayed.
Image 14–16
3. Enter a new PIN code (reference 1). Use a numeric value of 1–8 digits.
4. Click the Save icon (reference 2) to validate the new code.
The new PIN code is now valid (it will be accessible to the list of Pin codes).
14.4 SNMP
14.4.1 About SNMP configuration
Location & access
Menu: Configuration > System access > SNMP
Level: Administrator, Service technician
Overview
This panel allows to configure the Simple Network Management Protocol (SNMP), the Internet standard
protocol for collecting and organizing information about managed devices on IP networks.
Set time between two traps to be sent to the management servers. This time is set in minutes and can be
different for Non critical trap (reference 1) and Critical traps (reference 2).
Configuration - System access
To Next Page
Loading...
